Posts tagged industry

Ten Classic Printer Troubleshooting Methods – Printers, Office Equipment – Office Supplies Industry

By admin on November 25, 2011

Printer Has become almost essential for modern office supplies, printing it to replace the traditional handwritten greatly enhance our work efficiency. Today, the type of printer is also uneven, ranging variety of printers, but the more high-tech products more susceptible to failure. No matter how advanced the printer again, the most important thing is printing, the printer must have a common fault. The following tips home to quote a few common printer problems and solutions, we want to help:

1, the printer outputs a blank paper

For stylus printer rise to printing paper blank, usually because the dry ink ribbon, ribbon pull off, the print head damage, etc., should be replaced or repaired the print head ribbon; for inkjet printers, printing blank cause The failure was largely due to nozzle clogging, ink cartridges do not Ink Etc., should be cleaned or replaced cartridge nozzle; while for laser printers, causing such failure may be due to roll is not bothered by the toner imaging (imaging roller DC bias is not added), it may be photosensitive drum is not grounded, so that Gravitropism negative charge can not release a laser beam can not play a role in the photosensitive drum.

In addition, the laser printer’s imaging drum is not rotating, there will be no images generated and transmitted on paper. Disconnect the printer Power supply Remove the toner cartridge, open the lid on the notch, the photosensitive drum to be a sign of non-sensitive parts of re-loading machine. Switched on for a while, and then remove the check mark is moved, you can determine photosensitive drum is working. If the toner can not be normal supply or laser beam is blocked, there will be a blank paper to print the phenomenon. Therefore, we should check whether the run out of toner, ink cartridges into the machine is correct, whether the sealing tape were removed or whether the laser channel blocking properties. To note that the check be sure to turn off the power, because the laser beam may damage the operator’s eyes.

2, black print on paper output

For dot matrix printer, causing the failure is due to Hair Removal ribbon, ribbon on too much ink, print head dirty, poor quality ribbon and putting too close to such position adjustment, repair should be the first regulation to promote pole position, such as the failure can not be excluded, and then replace the ribbon, cleaning print head, generally you can troubleshoot; for inkjet printers, should focus on checking whether the damaged nozzle, the ink tube is broken, the ink type is normal and so on; for laser printers , is mostly due to the corona discharge wire control circuit failure or malfunction, makes the laser has been fired, causing the output to print black. Therefore, we should check whether the corona discharge wire disconnected, or the existence of high-voltage corona, the laser beam path of the beam detector is working properly.

3, incomplete print character or characters is not clear

For inkjet printers, there may be two reasons, to make ink cartridges, printer, or direct sunlight for long time caused by blocked nozzles. The solution is to inject the ink cartridge or renewal, if the cartridge does not run out, it can be concluded that the nozzle plug: Remove the cartridge (not the one for the printer cartridge nozzle needs to remove the nozzle), the nozzle on the warm water soak for a while, Do not pay attention to certain parts of the circuit board immersed in water, or else.

For dot matrix printer, may have the following reasons: Print ribbon to use for too long; print head a long time without cleaning, too much dirt; print head with needle; print head drive circuitry is defective. The solution is to first adjust the print head and print about the spacing between rollers, failure can not be excluded, ribbon can be new ones, if still does not work, you need to clean the print head up. Methods are: removal of the print head, the two fixed screws, won the print head, a small hook with a needle or remove the print head before and after the inclusion of dirt, are generally long accumulation of ribbon fiber, and then in print visible needle back of the head where the oil a few drops of instruments to remove a number of dirty, has no space to play a few ribbons of paper, and then loaded ribbon, so that the basic problem can be solved, if the print head off needle or drive circuit problem, it can only replace the print pin or drive up again.

This entry is filed under Business and tagged , , , , , , , , .

Power Hua Boshi: The First Person To Returnees Toner Industry! – Toner, Office Supplies – Office

By admin on November 7, 2011

It is said that China has entered Life and Death of the edge of the toner, ink industry, the competition is to changes in technology and technological competition, Chinese companies without their own advantages of technological innovation, will be gradually squeezed out into China of foreign enterprises market, which sounded the alarm for Chinese enterprises. Chinese companies face a choice, either maintaining the status quo sink or rise to innovation, to break a path independent of technology. Far across the ocean, in the toner industry for 18 years in power Hua Boshi heart of Chinese ink industry, in October 2006, his sixtieth year, he resolutely decided to resign from the U.S. technology company president colorImage position, industry, science and technology with Chinese ink one wishes to take off back to China alone, and joined the secret chemical Co., Ltd. Guangzhou Branch, prepared a toner industry renewed its youth, has aroused the concern of the industry.

From his wife and children, degree of oceans, to join the toner industry in China

In Section bright and spacious office buildings close saw the tall slender, hale and hearty for the elderly, people’s first impression is approachable and able. Conversation in the manner they lack foreign Santa Claus with promptness. Hua Boshi power industry in China toner eloquent, well known, the toner business in China is very familiar. 18 years in the United States is a strong R & D, Dr. Toner’s most valuable asset.

Power Hua Boshi Dr. strong OEM manufacturer for the 1989 research, development, production color toner. As well as development and production, including Canon, HP, Lexmark, Konica-Minolta, Okidata, Ricoh, Sharp and Toshiba, and other types of laser Printer And Duplicator Toner, founder of the U.S. color Image was one of our services in the United States colorImage nearly 18 years. In the 18 years of technical research and development, will devote all their energy on research and development in the toner in the toner, printing Check Toner, thermal transfer ink and toner such as ceramics, accumulated rich experience, a world-class leading experts.

While overseas, accompanied the couple lived, the lives of children go hand in hand, but as the toner industry experts, strong attention to the Chinese all the time, Dr. Toner and current status of development of the industry.

Overseas, Interpreting China’s national industry

Understanding of the Chinese market, strong as any one in Dr. Toner industry of people who for many years. When China started to develop when the toner industry, strong focus on Dr. began the development of home across the ocean, with the supplies industry, China has followed the development of the toner industry, but the coexistence of crisis and opportunity, the powerful Dr. excitedly, not just for China’s development has worried the toner industry. Dr. Strong said, in the United States a toner industry information exchange meeting it was noted that the next 5-10 years, about 70% of the world Toner Will be produced in China. So many foreign manufacturers started to enter China, but foreign manufacturers and Chinese enterprises Cooperation Model is intriguing, the Chinese companies into the plant, while Chinese enterprises have to be some short-term profits, but long term is not conducive to Chinese enterprises; not have their own R & D really is not conducive to the development of Chinese ink industry. Supplies the development of national industry sector is out of the question. In addition, toner sales channels in China can not build power compared with Europe and the United States. At present, China wants the world not only toner are quality constraints, and because with the original machine on behalf of foreign-based gap in China have a very big impact toner. Almost all the technical level of Chinese enterprises in a starting line, the toner formulation is very similar, almost no real customer needs according to organize more quickly enough, and can quickly develop product development team.

Joining Division secret chemical, an elderly “young heart”

Dr. Strong said the home has a desire to guide and organizations that can represent the world advanced level of a technical research team to guide the high-tech graphite research projects, will own 18 years accumulation of advanced technology experience and management experience to leave China, “do their modest means.” The R & D team to the market needs and customer needs research and development and production, and R & D ability, short development cycle. No rhetoric, nothing earth-shattering, quietly joined the Bureau, Dr strong secret chemical, in low-key close chemicals catalyzed by Section qualitative change taking place. Although we can not say to the Chinese ink industry has injected a cardiac stimulant, but at least we see a returnee to the future of Chinese ink industry expectations and contributions.

How to build a strong R & D team as soon as possible? How to implement technology into the market as soon as possible benefit? How in the world competition in the toner industry for the rapid rise of Chinese enterprises? Dr. Strong was carefully before returning thinking, after careful consideration decided to mainland China and have certain strength and growth potential to realize their aspirations. Through the study of Chinese ink large number of enterprises, and ultimately chose the local Chinese families secret chemical toner manufacturers. Division secret chemical to the powerful backing of branches and offices, the Group established to develop a platform for the toner industry; in production equipment, technology management are more advanced and the size of a modern enterprise; with advanced sound detection equipment; passed ISO9000 / 14000 for consistent quality management; and have business cooperation with foreign experts and experience. Therefore, strong across the seas, Dr. resolutely decided to return to the motherland, joining Division secret chemical. Dr. chosen not so much a strong Division secret chemical, it is more toner industry in China needs a large number of pure such as Dr. Strong participation. Dr.

strong not only to the Chinese toner color toner industry for 18 years R & D experience and management experience, but also in India and check toner, thermal transfer ink, toner, and other special ceramic toner technology will spare no effort The R & D and manufacturing.

As the world printer market, color laser printer market is becoming a mainstream, color toner toner industry in China will bring new opportunities and challenges.

Power Huabo Shi said, maybe I will come back to the United States after a few years to go, but I will do my best to be their own experience and technology to stay in this land of China. Hua Boshi power over 60 years develop in the spare time walking, tai chi lifestyle, and likes to spend his pleasant weekend movie theater. Back to China as the new environment, new business, this habit has

This entry is filed under Business and tagged , , , , , , , , .

How Smes Can Choose Erp? -erp-office Supplies Industry

By admin on October 27, 2011

SMEs are the most dynamic of our national economy, and is an important force for promoting economic development. For China’s SMEs, they face capital and small in scale, business single, employees and quality, management system, not standard problems to be solved. The face of complex and volatile business environment, more and more SMEs are seeking information tools to help enhance their market competitiveness, wants to make use of advanced Management Software To rationalize the production resources and improve management and efficiency.

SMEs into the growth stage, the original management model will not adapt to changes in external and internal environment, enterprises require a means to regulate use of information technology management, ERP implementation is naturally the most essential part. However, the small and medium enterprises on the date of birth has its own characteristics of chronic disease and how to address these chronic disease and the characteristics of the implementation of ERP, few take the route and spend less money trying to improve the success rate is of concern to each of the main problems for SMEs .

ERP application is an integrated engineering system, which includes pre-feasibility studies, selection, system implementation, system acceptance, secondary development phases, which, ERP selection is also a difficult start. Selection determines the direction of the ERP project, selection process like the helm of the ship voyage, if the helmsman in the wrong direction, then the full capacity of the drive can only be deviated from farther and farther in the right direction. How the selection, as placed in front of a problem for SMEs.

“Only election on, and not vote for you”, which is the criteria for selection of SMEs. “With information technology to stimulate industrialization, promote information”, the state understand the new path of industrialization strategy, the SME information received unprecedented attention. However, information technology practice for SMEs that invest hundreds of millions of information does not seem to bring people to the expected benefits. In the process of SME information there are still some misunderstanding, “information black hole”, “the information system project is court death, is not to die” and other problems, has always plagued the success of SMEs in the implementation of information technology. To this end, the author sums up the choice in the SME ERP, they can be the following as reference:

First, select the ERP based on analysis of small and medium enterprises

According to a: ERP implementation of the enterprise must have accurate positioning. ERP project is essentially a management project, rather than pure IT project, which will involve the import and implementation of all aspects of enterprise management, the need for enterprise management of existing, business processes, practices and operating habits of system integration, to improve the management level and efficiency of the continuous improvement of the main line. Therefore, before the ERP project selection, business must be on the ERP project as a clear and accurate positioning. A selection of the correct positioning of the project implementation can even play a strong role in guiding direct impact on the effect of ERP projects.

Based on 2: ERP on-line time to be clear. In the selection of the beginning, enterprises should investigate their own situation, understand the size of the business, personnel quality, management, information base, etc., to make sure information needs. SMEs have some similarities, such as weak management base, business processes and organizational structures also need to continuously improve the enterprise’s development strategy may change as the market continued to adjust; capital investment is limited to channel funds into the relative less; no corresponding standard business processes; information base is weak, in the information technology capital investment of less experienced information technology professionals less. In addition, different enterprises have different characteristics, the status quo must be clear in the analysis of these characteristics, different from the others dig their own needs, such as determining ERP project will be launched and to determine whether the system of categories and the use of an important basis for life.

Based on three: the company’s own development plan as the basis for selection. SMEs tend to be more concerned about the current business needs, such as some much-needed improvement and an urgent need to improve the efficiency. This in itself is no problem, but rather most firms ignore the long-term needs of the enterprise, such as the future problems that may arise, that is, on its own information technology without a comprehensive consideration, where there are holes where the meeting. This may soon see the benefits, and only a relatively small cost to pay, but for the future of information technology leaving a hidden danger. Followed in future, the system may be used more and more enterprises, more and more complex, resulting in the overall data can not be shared, the system repeated construction problems.

Based on four: the choice of service providers. Select an industry to focus on small and medium sized service provider, the actual value is behind the professional services team in the team, including experts in the industry of management consulting, hardware and software engineers, etc., from the professional point of view they help the user selection, analysis, implementation, and even the secondary development. Therefore, choose the background of small and medium industry service providers that meet real business needs of enterprises can cut the cost of ERP project.

Based on five: ERP project budget is the key to timely completion. Determine the budget is to determine the basis for selection of breadth. As SMEs channel funds into relatively small, therefore, should pay attention to the financial condition and according to their ERP system is expected to determine the useful life of ERP project budget framework, to ensure that the project proceed smoothly. Except for the actual purchase of ERP software and consultancy company to pay the costs of implementation, but also need to consider a lot of human resources-related costs, such as user to ensure the project participants time to join due to the situation, a series of overtime costs of the project, which will be on normal business operations under the overall budget costs, a lot of pressure, therefore, these costs must be considered in the project mobility budget. Adequate budget is to ensure that the key to ERP project completed on time.

According to six: the communication between various departments within the enterprise must be fully. Before the selection within the enterprise level discussions, confirmed. Communication is very important for SMEs, most of the senior is a member of the family, for the large amount of the investment, time, rate of return are very concerned about, not our consensus and participation, is very easily lead to the election Select type into a single price, it lost the meaning of investment in ERP projects. Another key selection of communication products and businesses to choose ERP fitness must have a good butt, ERP product to be suitable for application in the enterprise business management processes, management needs, a considerable part of the existing software is not suitable for

This entry is filed under Business and tagged , , , , .

5 Note wireless routers need – wireless router – office supplies industry

By admin on October 26, 2011

Wireless LAN There has been very well, and faster speed. The current mainstream products can not only achieve the rate of ordinary wired Ethernet, but also has a basic security protection. More importantly, the wireless network without wiring, so the consumer’s home user, network program is the best choice. Coupled with Centrino Notebook Popularity, so most users to buy the wireless router is also a matter of time.

But as the popularity of wireless routers, the corresponding problem is also increasing. After which bought a wireless router how to configure that people are most concerned about. Actually, the wireless network configuration is not complicated, configure wired router wireless router and configure the steps almost, but some places need to look at a few minutes can be easily buttoned.

One place to place Get the wireless router, the first thing to do is put the problem.

The role of the wireless router is the cable network signals into wireless signals, it is the core of the wireless network, so the location for the whole wireless network signal strength and transfer rate. It is proposed to select a not easy to be blocked, and the signal can cover all corners of the location of the house.

Wireless router should be relatively high position. Wireless signal is a straight line, every encounter a barrier, part of the wireless signal will be weakened, especially metal objects, it is the killer of wireless signals.

Wireless router should try living in the room. As the coverage of the wireless AP is a circular area, only placed in the room the wireless AP in order to protect the position of each room can receive wireless signals, so as to effectively access the wireless network.

Wireless network can automatically adjust transmission rate to adapt to the complex network environment. From the more recent wireless AP, wireless signal is stronger, the smaller the disturbance, the higher data rate. Do not pass through too many walls

, especially cast reinforced concrete wall. Experimental results show that in the 10 meters distance, wireless signal through two block walls, you can still achieve the nominal maximum transmission rate, but then through the floor slab, the transmission rate will be only half the nominal rate. Can be seen, reinforced concrete wall on the wireless signals have serious implications.

II configuration carefully Place to find a suitable location is completed, the next step is to configure the problem. Each line with TCP / IP protocol network device has its own IP address, wireless router is no exception. General wireless router will have its own fixed IP address within the LAN, this design also facilitates access to the IP address we passed to configure and test the wireless router. Of course, models of different brands of wireless router IP address not the same, the specific instructions refer to the relevant. Also to note, wireless LAN and wireless router must be in the same IP network segment.

Next, open the browser, the address bar enter the address of the wireless network nodes, such as http://192.168.254.254/, see the instructions informed the wireless network node after the admin password, can enter the correct input after the wireless network nodes management interface. For a new router is not set-off, some Setup Wizard will appear (SetupWizard). Such as named ConnectionConfiguration page, we can select the type of broadband, ADSL generally choose viaPPPoverEthernet, and Cable or FTTB choose viaDHCP. If the ISP requires a username and password, we can enter the corresponding position in the following, and about the Timeout is set to 120s. Then we can ESSID wireless router set to default values WLAN, set after not forget to click Save button to save.

If you need to connect the wireless router as wired router 100/10M use wired network, then we also need to further set up. Such as IP / DHCP options below SystemIPConfiguration configuration interface, to a set when DHCP Enable, so if the user’s wired LAN and wireless network card TCP / IP properties set to automatically obtain IP address from the wireless router Department can get an IP address. As DNSIP address, you can query a local ISP, generally can not set.

This entry is filed under Business and tagged , , , , , , , .

Older Entries »